 Command Sequence Error :(
Gotta make this short as 10000 is the character limit - basically cannot burn DVD's (command sequence error) but can Burn CD's
Here is a copy of my Nero Log
4C82-0010-8011-0000-4937-4141-8923
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-812S> Version: US0J - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-812S >Version: US0J - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4002H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-812S D: CDRom0
CyberDrv CW058D CD-R/RW E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 246MB (252908kB)
Free physical memory: 167MB (171276kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.7.2008
===== Disc-Copy over image - 1st step : Copy to image ...
12:56:59 AM #1 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:56:59 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory
12:56:59 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
12:56:59 AM #4 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
12:56:59 AM #5 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2165136 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
12:56:59 AM #6 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2165136 = 2165136, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
12:56:59 AM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
12:56:59 AM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2165135 (481:08.35, 4228MB)
12:56:59 AM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
12:56:59 AM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:56:59 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2165136 (2165136) = #2165136/481:8.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165136 blocks [Image Recorder]
--------------------------------------------------------------
12:56:59 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4434198528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2165136 | lead-out | 1 | 0x41 | 0x00
12:56:59 AM #13 Phase 120 File dlgbrnst.cpp, Line 1725
Creating the image for burning
12:56:59 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:21:48 AM #15 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2165136 (210990h), length 0 blocks
1:21:48 AM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:21:50 AM #17 Phase 121 File dlgbrnst.cpp, Line 1725
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
1:22:23 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 38912KB of Memory
1:22:24 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
1:22:24 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4434198528
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=481:08.36 ( 2165136) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Owner\My Documents\TempImage.nrg>
1:22:24 AM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
1:32:40 AM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2165135 (481:08.35, 4228MB)
1:32:40 AM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:32:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
1:32:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
1:32:41 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2165136 (2165136) = #2165136/481:8.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165136 blocks [D: LITE-ON DVDRW SOHW-812S]
--------------------------------------------------------------
1:32:41 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-812S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4434198528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2165136 | lead-out | 1 | 0x41 | 0x00
1:32:41 AM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:32:41 AM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
1:32:41 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:32:41 AM #14 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
1:32:41 AM #15 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
1:32:41 AM #16 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
1:32:41 AM #17 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:32:41 AM #18 SPTI -1023 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 21 09 90 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
1:32:41 AM #19 CDR -1023 File ThreadedTransferInterface.cpp, Line 1799
Command sequence error
D: LITE-ON DVDRW SOHW-812S
1:32:41 AM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
1:32:41 AM #21 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)  |